Products

Comprehensive solutions, decoders, digital centrals, hand throttles

The TrainModules© brand covers the full model railroading and modelling. Please browse in our products or choose a category below:

Digital decoders

Servo decoder XL Pol (4 servo, polarized) (TM-73735)

Cost effective 4-servo decoder solution for larger switch areas. The decoder receives the control commands from digital center, and change it's servo output and the relay output (at the center of movement). Thanks to the center position relay changin... » More info

Load regulated locomotive decoder (TM-56231)

Load regulated locomotive decoder with 6 function output, and 1A motor drive output.
- Addressable between 1 and 9999
- Supports consist functions and addressign
- Supports RailCom BiDi Communication
- Enhanced, high frequency and... » More info

DCC/Motorola Accessory decoder (TM-22332)

Accessory decoder for turnouts, signals or lamps.
Usable:
- Two coil turnouts
- Two aspect signals

Separated power and DCC signal input.... » More info

Digital and analog carriage lighting (TM-22753)

Digital carriage light which programmable to any locomotive address, or any function number.... » More info

Signal decoder (TM-74433)

For the Hungarian two, three or four aspect signals, with call signal (blinking white).
Also has a relay output for the auto stop sections before the red signal. And some inputs for external controlling. (Next signal red, next block occupancy, m... » More info

Mini Locomotive decoder (TM-56232)

Load regulated mini decoder with only F0 function and motor output. Can be mounted to many TT or N gauge locomotive.... » More info

Mini servo decoder (TM-73736) - RETIRED

Servo decoder and controller in one! Combined DCC and power supply connector for smaller and more compact design.
The module gets power and control signal from command station rail outputs. Two independent servo (and turnout) can be controlled w... » More info

Servo decoder XL (4 servo) (TM-73734) - RETIRED

Cost effective 4-servo decoder solution for larger switch areas. The decoder receives the control commands from digital center, and change it's servo output.... » More info
Alternative, replacement: Servo decoder XL Pol (4 servo, polarized)

Servo controller and decoder (TM-73733) - RETIRED

Can control two RC servo. Module is equipped with two relays, which can polarize turnout frog, and switch any load at the two end position (one changing relay contact).
With the two external inputs, can be also controlled the servo moving.... » More info
Alternative, replacement: Mini servo decoder, Servo decoder XL Pol (4 servo, polarized)

Digital accessories

RJ12 Hub (TM-75124)

RJ12 hub for LocoNet and XpressNet bus. RJ sockets are connected in parallel, and the internal wiring is compatible with XpressNet (X-Bus) and with LocoNet system. In XpressNet system this module can be used for distribute slave network for more than... » More info

Motor driver for accessory decoder (TM-23661)

Motor drive panel for Accessory Decoders.
With this panel, the accessory decoder can be control a motor driven undertable turnouts. Such as: Tillig Elite, Conrad, etc.... » More info

Transformer 230V/16V AC (80VA) (TM-87380)

Fully protected and safe transformer for accessories, lamps, turnouts. Can be used in analog and digital systems. For easy fixing the transformer has 4 mounting holes, and for the output wiring has a terminal socket.... » More info

LocoNet current source (Pullup) (TM-56276)

Larger LocoNet systems, the LocoNet current source can be an important part of network. Many devices on LocoNet network cause slower signal slew-rate, that case inappropriate operation.... » More info

DCC spike filter (TM-32273)

In long unterminated rail sections the power supply reflections may cause unwanted decoder operations. This filter can reduce the signal transient on model railroad layouts.... » More info

Automatic cutout, DCC circuit breaker (TM-28868)

The module should be wired between the booster and a separated short-circuit protected section. The sort-circuit is indicated with beeps and LED flashes, and the output is turned off. After the short circuit, the module will automatically turn on it'... » More info

Mini digital oscilloscope (TM-64643)

Mini digital storage oscilloscope for easy booster output, LocoNet Pull-up and LocoNet Syncron check.
The oscilloscope can be used without any power restriction or grounding problem, thanks to it's built-in rechargable battery.... » More info

Block occupancy feedback, 8 channel (LocoNet) (TM-56322)

Block occupancy detector and feedback module for LocoNet bus.
Independently programmable feedback address for 8 inputs.
A module send a broadcast "Feedback" message to the LocoNet.... » More info

Reverse loop and delta module (TM-73856)

In the digital and the conventional DC layout, the main problem is the reverse polarity short circuit, which cause the loop or delta track. This module can be detect the short circuit's voltage drops, and immediately reverse the polarity of separate... » More info

Digital booster II. (TM-26782)

Digital booster, with 3A output. The several inputs can receive the XpressNet socket(Roco, Lenz), Lenz 3-pole socket, LocoNet socket, DCC Rail sync socket.
Automatic short circuit recovery, automatic turn-off on invalid DCC signal.... » More info

Feedback module (S88 over RJ45) (TM-78832)

Feedback module, with the new S88 over RJ45 standard sockets (S88-N).
The module has 8 independent inputs with spike filter. The RS45 socket can accept conventional CAT5 (Ethernet) cable for connecting to central or pc-interface.... » More info

Block occupancy feedback, 4 channel (LocoNet) (TM-56321) - RETIRED

Block occupancy detector and feedback module for LocoNet bus.
Independently programmable feedback address for 4 inputs.
A module send a broadcast "Feedback" message to the LocoNet.... » More info
Alternative, replacement: Block occupancy feedback, 8 channel (LocoNet)

Digital booster (TM-26781) - RETIRED

Digital booster, with 3A output. The several inputs can receive the XpressNet socket(Roco, Lenz), Lenz 3-pole socket, LocoNet socket, DCC Rail sync socket.
Automatic short circuit recovery, automatic turn-off on invalid DCC signal.... » More info
Alternative, replacement: Digital booster II.

Central station, controlling

SmartLIO - Control desk (LocoNet) (TM-75461)

External switches can drive accessory decoders - turnouts, LEDs can indicate block occupancy, turnout feedback or etc.
The analog inputs can control locomotive, light detectorts.
With this module, we can easily create a control desk for tur... » More info

Shadow-station - rail control module (TM-77202)

The rail control module can control two separated tracks and two solenoids. The shadow-station main module controls several rail modules for automated train movement.... » More info

Shuttle train controller (TM-78261)

The shuttle train module for analog system, can be control a track section for back and forth shuttle train. It has train-length independent stopping method (rail contacts or IR sensors) for more realistic trains, and an adjustable timer for automati... » More info

Analog brake and station controller (TM-22272)

With this module in analog system the direction dependent automatically stopped and started (with acceleration) train can created. The acceleration and decceleration rate and the automatic starting delay can be adjusted with potentiometers. Instead o... » More info

Shadow-station - main control module (TM-77203)

The shadow-station main controller sends a commands to rail control modules for solenoid state and section powering. The main controller has a LocoNet interface, and with this feature it can be controlled via digital systems and the solenoids state a... » More info

Module LocoNet connector+info panel (TM-37871)

On digital module layouts, the FRED connector is the first thing do you need.
The three control LED shows the state of your LocoNet bus (good voltage level, good railsync signal and the Track state (global power on / global power off)
The p... » More info

NaWi Digital Center (TM-62946)

The NaWi Digital Center is real novelty in the world of digitial control. Due to number of interface connections the NaWi digital center can handle several device. Interfaces: LocoNet, X-Bus / XpressNet, CAN, NMRANet, S88-N, Lenz CDE, Ethernet, USB.... » More info

NaWi - Wireless hand controller (TM-62944)

- Only for testing purpose yet -... » More info

NaWi - Wireless Hub (16 channel) (TM-62945)

Receive 16 wireless hand controller, and transform the wireless communication to the LocoNet bus.... » More info

XpressNet and S88 PC interface (TM-54101)

Fully Lenz LI101 compatible PC interface, with S88 over ethernet socket. This module makes opportunity for computer controlling via USB interface. With XpressNet interface can be connected to Roco multimaus or Lenz systems.... » More info

Sound and lights

House interior light (cold white) (TM-57401)

The universal house interior lighting module may be used to bring various buildings of the model train layout. The current source LED supply ensures that the module produces a consistent light level independent of the input voltage.... » More info

House interior light (warm white) (TM-57402)

The universal house interior lighting module may be used to bring various buildings of the model train layout. The current source LED supply ensures that the module produces a consistent light level independent of the input voltage.... » More info

LED strip dimmer (12V) (TM-53371)

This LED dimmer is suitable for standard 12V LED strips to change the brightness (the product package does not contain LED strip). The brightness of the LED strip can be adjusted continuously with the on-board potentiometer from 1% to 99%.... » More info

Railroad Crossing controller (TM-72427)

Complete light, barrier and Car System controller for railroad crossing with to separated rails. This module is cascadable, can be extend unlimited number of parallel rails.
Input sensors may be reflection switches reed contacts or manual switch... » More info

Traffic light controller (TM-87235)

European traffic light controller, with Car System stop magnet control.
For two direction traffic junction, with walk signs.
The delayed Car System outputs, cause the better realistic effect.... » More info

Sound player 2 (TM-76876)

Sound player with 4 input. The built-in flash can store up to 47 seconds sound. Can be triggered with the reflection switch, manual switches or any other decoder. The sounds can be started with DCC turnout commands also. The playable format is cust... » More info

Mini light controller (TM-54426)

Can control many light effects, such as:
- Fire
- Welding
- TV
- Gas lamp
- Neon lights

The light effects has different Order ID-s.... » More info

Bulb simulator (TM-52674)

Simulating the slow glow up and slow flicker out.
This module must be connected between the signal decoder and the light signal. The LEDs on this module outputs behave as the conventional light bulbs and this effect is same as the old light sign... » More info

Current source for LEDs (TM-28776)

This module can drive LEDs with constant current. The brightness is constant, not depend on input voltage. This module can be useful in analog systems.... » More info

High current blinker (TM-25465)

Adjustable blinking time and period flasher. The time and period adjustable between 100 ms and 5 sec continuously.
Two, high-current output can drive anything up to 1A.... » More info

Running lights controller (TM-78654)

Running lights controller with 10 separated output. The module lights up the LEDs after each other.
Trimmer potentiometer adjustable speed, and selectable number of LEDs.... » More info

Mini flashlight (TM-64352)

Miniature extremely short pulse flasher. Ideal for high building flasher, light towers, storm signals, adverts, etc.
The LED on-pulse is very short, about few ms length.... » More info

Sound player (TM-76875) - RETIRED

Sound player with 4 input. The built-in flash can store up to 47 seconds sound.
Can be triggered with the reflection switch, manual switches or any other decoder.
The playable format is custom, but the PC uploader can convert from any media... » More info
Alternative, replacement: Sound player 2

Vehicles, Car System

Light controller for Car System Vehicles (TM-27201)

Mini light controller for Car System vehicles.
- Ambulance
- Fire dep.
- Police
- Direction lights, reflectors.

Can drive and control white LEDs, from 0.7V!... » More info

Intelligent battery charger (TM-42200)

Intelligent controlled battery charger for Car System vehicles.
- Fast charging
- Trickle charging
- Usable / Full OK indicators
... » More info

Sensors, detectors

Reflective object sensor (TM-73379)

The module based on infrared beam reflection. If the modulated (ambient light protection) light is reflected from IR LED to the Sensor, the output is activated.
This module can be mounted under the layout, and can detect any object above the rai... » More info

Block occupancy detector (TM-26301)

Can detect 4 separated section occupancy. The detection based on current flow - diode voltage drops, that's why can detect only few mA load on the section.
The outputs are galvanically isolated for easier use with feedback modules, decoders and ... » More info

Cables, accessories

S88-N/NMRANet cable 1m (TM-52201)

S88-N/NMRANet cable 1m... » More info

S88-N/NMRANet cable 2m (TM-52202)

S88-N/NMRANet cable 2m... » More info

S88-N/NMRANet cable 5m (TM-52203)

S88-N/NMRANet cable 5m... » More info

LocoNet/XpressNet cable 0.5m (TM-52208)

LocoNet/XpressNet cable 0.5m... » More info

LocoNet/XpressNet cable 1m (TM-52204)

LocoNet/XpressNet cable 1m... » More info

LocoNet/XpressNet cable 2m (TM-52205)

LocoNet/XpressNet cable 2m... » More info

LocoNet/XpressNet cable 5m (TM-52206)

LocoNet/XpressNet cable 5m... » More info

LocoNet/XpressNet cable 10m (TM-52207)

LocoNet/XpressNet cable 10m... » More info

Others

Universal timer and delay (TM-86481)

Ideal for timing and pulse enlarging. The delay and the pulse enlarge time can be adjusted via two trimmer potentiometer within wide range.
Module outputs can be drive any load up to 1A.
First stage (impulse stretching): 200 ms - 11 sec
... » More info

Servo holder console (TM-73461)

Essential for safe and easy undertable servo mounting. Compatible with several types of 9g servos, and 3 different position spring steel holes guarantee the perfect spring steel position.... » More info

Extender with relays (TM-73539)

2 independent channel high current relay extender module for our control outputs modules. Can be used with block occupancy detector, reflection object sensor, etc.... » More info

Micro servo (9g) (TM-73781)

Ideal for undertable turnouts. Recommened to our servo decoder and controller modules.... » More info

Universal relay module (TM-87351)

Universal bistable relay board with many outputs and contacts for any purpose in analog or digital system. Can be used for automatic signals, turnouts, etc.... » More info

Servo controller (TM-73726)

Simple servo controller, with two external input.
Adjustable two endpoints, and the changing speed.... » More info

Loc decoder panel (TM-56271)

Simple panel with NEM652 connector for easy decoder wiring on old non-digital locomotives.... » More info

Pinhole camera power supply (TM-22677)

9V stabilized power supply and charger for miniature pinhole cameras. Usable on analog and digital layout.
This module has a stabilized output voltage and a miniature battery charger for 9V (8.4V) batteries. The battery charging is important for... » More info

Rail fixing plate (H0) (TM-87220)

This PCB made for rail fixing for model train layouts and module layouts (for example FREMO). The proper and precise fixing is important. Mainly for PECO, PIKO and ROCO rails, but may fit to any other brands, thanks to it's standard size.
The p... » More info

Variable speed clock (TM-25625)

This clock is essential for FREMO systems where the global and precise clock is important. The clock has a LocoNet connector for global synchronized time code (loconet time code slot) and an optional DCF / GPS receiver. Can be operated independently ... » More info

TrainModules© is registered trademark of BioDigit Ltd.
Copyright 2015, BioDigit Ltd.
Do you have a question? Contact us!